JAEL BUSTOS

It was originally a rtr

I would like suggestions on what can I replace-buy for it to be better or what do u think

thanks

miserynitro

My Feedback: (8)

for one.. RRP tranny gears!! they ROCK!! a must have for that machine.... also the suspension blocks, can't remember what they are called, for the rear lower arms, in which the hinge pin goes through... get those in Aluminum as well... it helps alot... It also looks like you are still using the original ball cups, the black ones..... i would go and get some RPM ball cups, it takes a lot of slop out of the turnbuckles and also the steering... plus they don't pop off as easy....

gmac4826

does it still have the RTR engine in it?

miserynitro

My Feedback: (8)

that looks like a Wasp .12.... but it is definitly not the RTR engine...

MrSavage

hey guys my shocks on my rc10gt rtr are gettin a little sloppy and i could rebuild them but i think i'd rather get new ones. what do ya'll recomend that are stiff for bashing and jumping? oh and what do "piggyback" shocks do?

hairnutz

You can do wonders for your current shocks by refilling them with heavier shock oil and replacing the springs with harder ones. Should run you less than $20.00 for all that.

I have a kit version so Im not sure if there is a difference in the shocks between kit and RTR but if I were to guess, the kit probably has a little thicker shaft. As long as yours arent bent, I would just refill and replace springs. But, if you have the cash and want 'em, get what you want

Kyle2Baseball

Were did u grt all the hop ups for it like the rear a arms snd all that?

JAEL BUSTOS

the ball cups are rpm
the engine is a .12 team orion wasp
I got all the hopups at my lhs
the suspension mounts or "blocks" are also rpm

I plan on racing this rc10 so tell me what else could make it better

creeping death

love the avatar!

misasi

Grab the MIP clutch if you dont already have it. Your pretty much ready to go. Nice truck, my GT has come a long way from when i first got it as a RTR kit. Great truck