splais

My Feedback: (25)

If you do, did you run a Y with a tube to each muffler, or just run a single line to one muffler?

Flyfalcons

Y-connection so each tube goes into a muffler.

mrbigg

My Feedback: (21)

Both. More smoke, the better.

zeev barnes

http://www.youtube.com/watch?v=AdoM4...ature=youtu.be
Hi
attach the film of me and my friend B29 with 4 DLE30 on it two of them with smoke you can see it after 3.10 minutes film
there is only one smoke pump in the center section
work great
best

Giant_Scale_Gasser

My Feedback: (84)

On my DLE-170 I was considering 2 seperate tanks, pumps and lines, one for each cylinder. But after much thought, I went with the same Y arrangement I have on my 35% Godfrey Extra 330. It lays down enough smoke to make any pilot smile.

speedracerntrixie

My Feedback: (29)

don't forget the check valve just before the Y

Giant_Scale_Gasser

My Feedback: (84)

I actually run 2 check valves, one on each side of the Y. Do you get better results running a single check?
I did 2 just thinking that 1 may be a point of restriction.

speedracerntrixie

My Feedback: (29)

GSG I would expect it to work the same. I just went with a single check valve because that is what I had seen others do. Lots of roads lead to the same city LOL

Giant_Scale_Gasser

My Feedback: (84)

Trixie,
I haven't finished plumbing my new 40% project yet. Maybe I'll try the single. One less thing to go wrong I suppose.

OldScaleGuy

My Feedback: (2)

Y connector with one pump on a DLE-111 in a 1/3 330L. Works great.

Steve

My Feedback: (54)

Same as the rest, Y with single check valve. Still gets the tail real dirty!