NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
08-30-2009, 03:19 PM
#76
Member
Join Date: Aug 2009
Location: honolulu,
HI
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Hey John, I need some help...
- Always provide your order number ( usually begins with YSTxxx ).
yhst-17210252890263-91341
- Provide a link to the web page showing which product you purchased.
http://www.nitroplanes.com/new20sdmoco4.html
- Include a description of the item you are trying to obtain.
I accidently broke the red antennawire off at the base ofthe stock3 channel receiver while trying to fix the plane after a small crash (plane is fine but I can't control it).Do you stockthese receivers?If so how much do they cost? The maximum amount of distance i can get from the plane is about 3 feet before it cuts out now
- If possible pictures help.
http://site.nitroplanes.com/condor-plane-2.jpg
Please help,
I R sad
Walter
- Always provide your order number ( usually begins with YSTxxx ).
yhst-17210252890263-91341
- Provide a link to the web page showing which product you purchased.
http://www.nitroplanes.com/new20sdmoco4.html
- Include a description of the item you are trying to obtain.
I accidently broke the red antennawire off at the base ofthe stock3 channel receiver while trying to fix the plane after a small crash (plane is fine but I can't control it).Do you stockthese receivers?If so how much do they cost? The maximum amount of distance i can get from the plane is about 3 feet before it cuts out now
- If possible pictures help.
http://site.nitroplanes.com/condor-plane-2.jpg
Please help,
I R sad
Walter
08-31-2009, 12:15 AM
#77
Junior Member
Join Date: Apr 2009
Location: Morris, IL
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
yhst-17210252890263-76755
Ultimate BiPe 40 - 41.5 Gas_Ultimate40Purple
Scale Nitro Gas Radio
Remote Control Aerobatic
Airplane (ARF) BiPlane
Need: Top and Bottom wing set.
Thanks.
Ultimate BiPe 40 - 41.5 Gas_Ultimate40Purple
Scale Nitro Gas Radio
Remote Control Aerobatic
Airplane (ARF) BiPlane
Need: Top and Bottom wing set.
Thanks.
08-31-2009, 08:48 AM
#79
Junior Member
Join Date: Aug 2009
Location: Arnold,
MD
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Hi John:
can you send tracking information for replacement blade..I need all the plastics...the cone and the blade.Thank you.
Lawrence MItchell
21012
can you send tracking information for replacement blade..I need all the plastics...the cone and the blade.Thank you.
Lawrence MItchell
21012
09-02-2009, 01:59 PM
#80
Junior Member
Join Date: Apr 2007
Location: Joplin,
MO
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
[quote]ORIGINAL: nitrostaff1
Sure buddy. Please PM me your order number and if you don't know your order number. Let me know your name and address so I can help you locate a pair of wings for you. Will you been needing the retract as well? or you plan to use the same retracts?
John
Nitro planes
[quote]ORIGINAL: jouleman
I need a set of replacement wings with gear for my Double Trouble Two P-51 D. I have pulled the right gear and it has ruined the wood as well. I don't feel like fixing it again. Thanks.
Can you tell me what part number and how much shipped to 64804? http://www.nitroplanes.com/saofwenewdot.html
I PM'd you. Just wondering if you have read it...Thanks much!
09-03-2009, 03:23 PM
#82
Junior Member
Join Date: Aug 2009
Location: Arnold,
MD
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Sorry If you get this email, but I need to get JOhns Attnetion
JOhn: This is Lawrence Mitchell ZIP 21012
exceed F-18
you were kind enough to send the fam...but I also need the plastic coen that goes on top of the blade.....Thank you
Could you find it in your heart to send the cone?
JOhn: This is Lawrence Mitchell ZIP 21012
exceed F-18
you were kind enough to send the fam...but I also need the plastic coen that goes on top of the blade.....Thank you
Could you find it in your heart to send the cone?
09-06-2009, 10:20 PM
#83
Junior Member
Join Date: Jan 2004
Location: tonopah,
AZ
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Hello,
I have a 120 ultimate bi-plane arf, the pink and blue one.
I am in need a the complete hardware kit for this airplane. If you could tell me how much this and if you have one i would really appreciate it
I bought the plane without hardware and really wanting to build and fly this airplane.
If you could help me with this i would really appreciate it.
Thanks
Scott
I have a 120 ultimate bi-plane arf, the pink and blue one.
I am in need a the complete hardware kit for this airplane. If you could tell me how much this and if you have one i would really appreciate it
I bought the plane without hardware and really wanting to build and fly this airplane.
If you could help me with this i would really appreciate it.
Thanks
Scott
09-07-2009, 01:11 PM
#84
Junior Member
Join Date: Sep 2009
Location: chandler, AZ
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Please help. I bought the Guanli a-10 a few weeks ago. after cycling the battery 3 times the cover started to melt,afer charging for approx 60 minuetes.I only get clicks from the motors now, they did turn on once for a few seconds with minimal power then stopped. All sevos still working though. I wonder if the speed control is wasted. can you help me?
09-07-2009, 08:09 PM
#85
Join Date: Apr 2007
Location: nottingham,
PA
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
I have tried for 2 WEEKS to obtain a Bobcat 50 manual, but to avail????
I have tried every forum under the sun and threads and posting and contacting, but no help yet, so I will try here.
Would someone help me obtain a manual please?
Thank you in advance,
Lou
I have tried every forum under the sun and threads and posting and contacting, but no help yet, so I will try here.
Would someone help me obtain a manual please?
Thank you in advance,
Lou
09-07-2009, 08:18 PM
#86
Member
Join Date: Aug 2009
Location: honolulu,
HI
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Did you contact john/nitrostaff1 directly?
ORIGINAL: Fledgling
I have tried for 2 WEEKS to obtain a Bobcat 50 manual, but to avail????
I have tried every forum under the sun and threads and posting and contacting, but no help yet, so I will try here.
Would someone help me obtain a manual please?
Thank you in advance,
Lou
I have tried for 2 WEEKS to obtain a Bobcat 50 manual, but to avail????
I have tried every forum under the sun and threads and posting and contacting, but no help yet, so I will try here.
Would someone help me obtain a manual please?
Thank you in advance,
Lou
09-08-2009, 12:12 AM
#89
My Feedback: (1)
Join Date: Feb 2007
Location: madera, CA
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
hey, john. my name is rick. i'm in need of a cmp extra 300s 140 parts i need the canopy and if the abs peice that goes under it is availabe great if not the canopy is enough. please let me know and if there is a canopy from another model that would fit let me know thanx, rick [email protected]
09-08-2009, 12:18 AM
#90
My Feedback: (1)
Join Date: Feb 2007
Location: madera, CA
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
hey, john. my name is rick. i'm in need of cmp extra 300s 140 parts i need the canopy and if the abs peice that goes under it is availabe great if not the canopy is enough. please let me know and if there is a canopy from another model that would fit let me know thanx, rick rcrick10@yahoo.
09-09-2009, 10:12 PM
#91
Junior Member
Join Date: Sep 2009
Location: BOSSIER CITY, LA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
I will resist the urge.....I have been having a difficult time getting a part for my NitroPlanes F-15...the Servo arm for the elevator control was not on the airplane when I received it. I have been in contact with the service department of Nitro Planes with results that have been less than satisfactory. I have sent picturesof the missing part and a complete description of that part....I have received 3 different replacement orders and they have all been incorrect. Now, after over 2 months of working to resolve this issue, still not able to fly my plane, I was told by the service department that they would not send anymore parts.....I still have not received the correct part...! As a customer, I find myself in the dissatisfied category. They will refund my money, but I have to pay shipping to return the model...it's not my fault that the product was incomplete when I received it.....I sent the required money, why did'nt I receive the complete product. I would gladly buy the part if it were carried in a hobby shop in this area. What do I do now? We're only talking about a servo arm....how difficult should this be?
Any help would be appreciated! The order #85931
Any help would be appreciated! The order #85931
09-10-2009, 06:20 PM
#92
Senior Member
Thread Starter
Join Date: Oct 2006
Location: LA,
CA
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
If you are talking about the cone that's on the top of the fan then we've shipped to you already. USPS 420210129101805213907703386414
John
Nitro planes
John
Nitro planes
ORIGINAL: Scoobys_piece
hello John:
I was in the hospital for about a month and then this...Sheesh. Thank you.
hello John:
I was in the hospital for about a month and then this...Sheesh. Thank you.
09-10-2009, 06:21 PM
#93
Senior Member
Thread Starter
Join Date: Oct 2006
Location: LA,
CA
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Yes I can help. Please private message (PM) your email address and I'll get you a copy.
John
Nitro Planes
John
Nitro Planes
ORIGINAL: rstpete
Hi John,
Help please. I just bought a NitroModel Piper J3 52 71.5'' in the still sealed box from a fellow that bought it and then got out of the hobby. There is no manual. Can you help me obtain/download one in any way?
Thanks in advance for your help.
Pete
Hi John,
Help please. I just bought a NitroModel Piper J3 52 71.5'' in the still sealed box from a fellow that bought it and then got out of the hobby. There is no manual. Can you help me obtain/download one in any way?
Thanks in advance for your help.
Pete
09-10-2009, 06:23 PM
#94
Senior Member
Thread Starter
Join Date: Oct 2006
Location: LA,
CA
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Receiver replaced on the 4th via USPS 420968219101805213907738427830
John
Nitro Planes
John
Nitro Planes
ORIGINAL: eccvets
Hey John, I need some help...
- Always provide your order number ( usually begins with YSTxxx ).
yhst-17210252890263-91341
- Provide a link to the web page showing which product you purchased.
http://www.nitroplanes.com/new20sdmoco4.html
- Include a description of the item you are trying to obtain.
I accidently broke the red antenna wire off at the base of the stock 3 channel receiver while trying to fix the plane after a small crash (plane is fine but I can't control it). Do you stock these receivers? If so how much do they cost? The maximum amount of distance i can get from the plane is about 3 feet before it cuts out now
- If possible pictures help.
http://site.nitroplanes.com/condor-plane-2.jpg
Please help,
I R sad
Walter
Hey John, I need some help...
- Always provide your order number ( usually begins with YSTxxx ).
yhst-17210252890263-91341
- Provide a link to the web page showing which product you purchased.
http://www.nitroplanes.com/new20sdmoco4.html
- Include a description of the item you are trying to obtain.
I accidently broke the red antenna wire off at the base of the stock 3 channel receiver while trying to fix the plane after a small crash (plane is fine but I can't control it). Do you stock these receivers? If so how much do they cost? The maximum amount of distance i can get from the plane is about 3 feet before it cuts out now
- If possible pictures help.
http://site.nitroplanes.com/condor-plane-2.jpg
Please help,
I R sad
Walter
09-10-2009, 06:30 PM
#95
Senior Member
Thread Starter
Join Date: Oct 2006
Location: LA,
CA
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Yes PM sent. Waiting for your reply.
John
Nitro Planes
[quote]ORIGINAL: jouleman
[quote]ORIGINAL: nitrostaff1
Sure buddy. Please PM me your order number and if you don't know your order number. Let me know your name and address so I can help you locate a pair of wings for you. Will you been needing the retract as well? or you plan to use the same retracts?
John
Nitro planes
John
Nitro Planes
[quote]ORIGINAL: jouleman
[quote]ORIGINAL: nitrostaff1
Sure buddy. Please PM me your order number and if you don't know your order number. Let me know your name and address so I can help you locate a pair of wings for you. Will you been needing the retract as well? or you plan to use the same retracts?
John
Nitro planes
ORIGINAL: jouleman
I need a set of replacement wings with gear for my Double Trouble Two P-51 D. I have pulled the right gear and it has ruined the wood as well. I don't feel like fixing it again. Thanks.
Can you tell me what part number and how much shipped to 64804? http://www.nitroplanes.com/saofwenewdot.html
I PM'd you. Just wondering if you have read it...Thanks much!
I need a set of replacement wings with gear for my Double Trouble Two P-51 D. I have pulled the right gear and it has ruined the wood as well. I don't feel like fixing it again. Thanks.
Can you tell me what part number and how much shipped to 64804? http://www.nitroplanes.com/saofwenewdot.html
I PM'd you. Just wondering if you have read it...Thanks much!
09-10-2009, 07:10 PM
#96
Senior Member
Thread Starter
Join Date: Oct 2006
Location: LA,
CA
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Ok what's your order number? Also can you please send me a link of the item from my website or the product code of the product.
John
Nitro Planes
John
Nitro Planes
ORIGINAL: 4smada
Hello,
I have a 120 ultimate bi-plane arf, the pink and blue one.
I am in need a the complete hardware kit for this airplane. If you could tell me how much this and if you have one i would really appreciate it
I bought the plane without hardware and really wanting to build and fly this airplane.
If you could help me with this i would really appreciate it.
Thanks
Scott
Hello,
I have a 120 ultimate bi-plane arf, the pink and blue one.
I am in need a the complete hardware kit for this airplane. If you could tell me how much this and if you have one i would really appreciate it
I bought the plane without hardware and really wanting to build and fly this airplane.
If you could help me with this i would really appreciate it.
Thanks
Scott
09-10-2009, 07:12 PM
#97
Senior Member
Thread Starter
Join Date: Oct 2006
Location: LA,
CA
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Yes it's the ESC that's having a problem and I can replace it. Order number?
John
Nitro Planes
John
Nitro Planes
ORIGINAL: doorman7
Please help. I bought the Guanli a-10 a few weeks ago. after cycling the battery 3 times the cover started to melt ,afer charging for approx 60 minuetes. I only get clicks from the motors now, they did turn on once for a few seconds with minimal power then stopped. All sevos still working though. I wonder if the speed control is wasted. can you help me?
Please help. I bought the Guanli a-10 a few weeks ago. after cycling the battery 3 times the cover started to melt ,afer charging for approx 60 minuetes. I only get clicks from the motors now, they did turn on once for a few seconds with minimal power then stopped. All sevos still working though. I wonder if the speed control is wasted. can you help me?
09-10-2009, 07:15 PM
#98
Senior Member
Thread Starter
Join Date: Oct 2006
Location: LA,
CA
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
I can look for it. Order number? can I get a link of the plane you have from my website?
John
Nitro Planes
John
Nitro Planes
ORIGINAL: STRAUBMAN
Hey John. Any chance of getting a wing for the Sukhoi 31? Yellow/Blue.
Thanks
Cliff
Hey John. Any chance of getting a wing for the Sukhoi 31? Yellow/Blue.
Thanks
Cliff
09-10-2009, 07:24 PM
#99
Senior Member
Thread Starter
Join Date: Oct 2006
Location: LA,
CA
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Let me look for it and I'll get back to you.
John
Nitro Planes
John
Nitro Planes
ORIGINAL: rcrick10
hey, john. my name is rick. i'm in need of a cmp extra 300s 140 parts i need the canopy and if the abs peice that goes under it is availabe great if not the canopy is enough. please let me know and if there is a canopy from another model that would fit let me know thanx, rick [email protected]
hey, john. my name is rick. i'm in need of a cmp extra 300s 140 parts i need the canopy and if the abs peice that goes under it is availabe great if not the canopy is enough. please let me know and if there is a canopy from another model that would fit let me know thanx, rick [email protected]
09-10-2009, 07:37 PM
#100
Senior Member
Thread Starter
Join Date: Oct 2006
Location: LA,
CA
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
ok no problem and I'm sorry about this. I'll correct this and send you the missing servo arms.
Update: I've removed 2 elevator servo arm from the F15E you have so I know I got the correct servo to you this time.
John
Nitro Planes
Update: I've removed 2 elevator servo arm from the F15E you have so I know I got the correct servo to you this time.
John
Nitro Planes
ORIGINAL: Baalooo
I will resist the urge.....I have been having a difficult time getting a part for my NitroPlanes F-15...the Servo arm for the elevator control was not on the airplane when I received it. I have been in contact with the service department of Nitro Planes with results that have been less than satisfactory. I have sent picturesof the missing part and a complete description of that part....I have received 3 different replacement orders and they have all been incorrect. Now, after over 2 months of working to resolve this issue, still not able to fly my plane, I was told by the service department that they would not send anymore parts.....I still have not received the correct part...! As a customer, I find myself in the dissatisfied category. They will refund my money, but I have to pay shipping to return the model...it's not my fault that the product was incomplete when I received it.....I sent the required money, why did'nt I receive the complete product. I would gladly buy the part if it were carried in a hobby shop in this area. What do I do now? We're only talking about a servo arm....how difficult should this be?
Any help would be appreciated! The order #85931
I will resist the urge.....I have been having a difficult time getting a part for my NitroPlanes F-15...the Servo arm for the elevator control was not on the airplane when I received it. I have been in contact with the service department of Nitro Planes with results that have been less than satisfactory. I have sent picturesof the missing part and a complete description of that part....I have received 3 different replacement orders and they have all been incorrect. Now, after over 2 months of working to resolve this issue, still not able to fly my plane, I was told by the service department that they would not send anymore parts.....I still have not received the correct part...! As a customer, I find myself in the dissatisfied category. They will refund my money, but I have to pay shipping to return the model...it's not my fault that the product was incomplete when I received it.....I sent the required money, why did'nt I receive the complete product. I would gladly buy the part if it were carried in a hobby shop in this area. What do I do now? We're only talking about a servo arm....how difficult should this be?
Any help would be appreciated! The order #85931
