Lanier 40% Edge build thread
#51
Senior Member
My Feedback: (11)
Join Date: Jul 2005
Location: Durango,
CO
Posts: 989
Likes: 0
Received 0 Likes
on
0 Posts
RE: Lanier 40% Edge build thread
WOW you are one helpful man!!! Thank you so much. I wont need a big vehicle because I luckily live on a golf course!!! The hole I live on is quit big and it roght next to a big river so I have pleanty of space to fly. whats the width, hight and length of the cowl. How wide is the fuse at the wing tube region. How tall does it stand. If you dont mind could you take a size comparison pick of the fuse? Thanks again, your a great help! BTW im going to receive mine next week and start the build!
#54
My Feedback: (22)
Join Date: Jan 2002
Location: Punta Gorda,
FL
Posts: 1,270
Likes: 0
Received 0 Likes
on
0 Posts
RE: Lanier 40% Edge build thread
The plans are vital , this is a very complex large scale plane.I would not build the plane without them. If you did order the kit from Lanier you will get a complete set .
The plans are not to 40% scale but you do need them for reference . All the measurements and critical notes are printed on the plans which is 1/2 scale or 20 %. I referred to them though out the entire build.
[/quote]
The plans are not to 40% scale but you do need them for reference . All the measurements and critical notes are printed on the plans which is 1/2 scale or 20 %. I referred to them though out the entire build.
[/quote]
#55
Senior Member
My Feedback: (11)
Join Date: Jul 2005
Location: Durango,
CO
Posts: 989
Likes: 0
Received 0 Likes
on
0 Posts
RE: Lanier 40% Edge build thread
Could you tell me the width of the fuse at the wing tube? What are the demensions of the cowl? How long is the wing root and how long is the tip? Also on the elevator please. I need to know this for storage and for the wing bags im making.
#56
My Feedback: (22)
Join Date: Jan 2002
Location: Punta Gorda,
FL
Posts: 1,270
Likes: 0
Received 0 Likes
on
0 Posts
RE: Lanier 40% Edge build thread
Here are the specs:
At wing tube 12 1/4"
Cowl front to back 15 - 3/8 ", top to bottom at rear of cowl 13 - 1/4", width 15 ".
wing root 26 - 3/4", tip 12 - 1/2".
elevator root 14 - 1/2" , tip 8 - 3/4".
jef
At wing tube 12 1/4"
Cowl front to back 15 - 3/8 ", top to bottom at rear of cowl 13 - 1/4", width 15 ".
wing root 26 - 3/4", tip 12 - 1/2".
elevator root 14 - 1/2" , tip 8 - 3/4".
jef
#57
Senior Member
My Feedback: (11)
Join Date: Jul 2005
Location: Durango,
CO
Posts: 989
Likes: 0
Received 0 Likes
on
0 Posts
RE: Lanier 40% Edge build thread
thank you very much! Sounds BIG! Just curious where do you store yours? Do you think you could make bigger aielerons or does it snap good? What engine do you have in yours?
#58
My Feedback: (22)
Join Date: Jan 2002
Location: Punta Gorda,
FL
Posts: 1,270
Likes: 0
Received 0 Likes
on
0 Posts
RE: Lanier 40% Edge build thread
I store mine on a large table in my garage. The ailerons are huge no need to change the size, snaps are perfect. I have a DA 150 which has more power than I will ever need. I fly mostly at 1/2 throttle or less. For my style of flying a DA 100 would probably be fine.
#63
My Feedback: (22)
Join Date: Jan 2002
Location: Punta Gorda,
FL
Posts: 1,270
Likes: 0
Received 0 Likes
on
0 Posts
RE: Lanier 40% Edge build thread
ORIGINAL: Mr.Extra 260
What was the most difficult part of the build for you?
Covering because I don't like to do it.
What do you fly? I am a sport pilot , I like to do aerobatics rolls loops snaps etc.
What was the most difficult part of the build for you?
Covering because I don't like to do it.
What do you fly? I am a sport pilot , I like to do aerobatics rolls loops snaps etc.
#67
My Feedback: (22)
Join Date: Jan 2002
Location: Punta Gorda,
FL
Posts: 1,270
Likes: 0
Received 0 Likes
on
0 Posts
RE: Lanier 40% Edge build thread
I don't know if it would fit in a Tahoe. You need at least 110 inches for the fuse.The Lanier web photo is the only one I could find that shows any size reference.
#68
Senior Member
Thread Starter
RE: Lanier 40% Edge build thread
ORIGINAL: Mr.Extra 260
would it fit in a tahoe? By the way could you take a size comparison picture of the plane? Thanks again for all your help.
would it fit in a tahoe? By the way could you take a size comparison picture of the plane? Thanks again for all your help.
#71
Senior Member
My Feedback: (18)
Join Date: Oct 2002
Location: brownsburg,
IN
Posts: 950
Likes: 0
Received 0 Likes
on
0 Posts
RE: Lanier 40% Edge build thread
FlyFalcons what ya doin to make so muuuuch mooooola now..Are you still on voluntary or is it over for good. Express is still workin, movin to Indy in April so all my stuff will be storaged till we get a house built.
#72
Senior Member
Thread Starter
RE: Lanier 40% Edge build thread
Back from furlough; hopefully that will be the last of that. Now all I need is for them to close my base or some other source for elevated blood pressure.