DLE What?!?!
#151
My Feedback: (47)
Join Date: Apr 2009
Location: Whitestone,
NY
Posts: 1,895
Likes: 0
Received 0 Likes
on
0 Posts
RE: DLE What?!?!
guille - if you went Nitro at this point you'd certainly be bucking the trend. With the price and quality of DLE gassers, I'm not sure how OS or YS are selling any large engines anymore. I have a YS 140 in a 70" sport plane - awesome engine - powerful as anything. I also have a DLE 20 another of that same model plane. I can't open the YS 140 up WOT cause I don't need that much power, and the nitro consumption is already ridiculous. I LOVE the sound and power of the YS, but I figured out that the fuel cost with the YS 140 is TEN TIMES that of the DLE 20, which gives almost identical performance in that plane (give the cost of 15% nitro and the at-least double-rate of fuel consumption in the YS). So, while nitro engines are great in a lot of ways, are you willing to pay those fuel costs?
#152
RE: DLE What?!?!
ORIGINAL: Tired Old Man
To date, no model airplane manufacturer has requested Walbro to make anything. So Walbro has to not made a carb for RC modeling applications.
To date, no model airplane manufacturer has requested Walbro to make anything. So Walbro has to not made a carb for RC modeling applications.
Are you 100% sure ??
#153
Senior Member
My Feedback: (4)
Join Date: Jul 2002
Location: Somewhere,
DC
Posts: 9,825
Likes: 0
Received 0 Likes
on
0 Posts
RE: DLE What?!?!
I asked Luis Salas at Walbro that question a few years ago...NO ONE had Walbro design a carb for a specific model airplane engine...NO ONE...
Your result may vary, but Luis is THE MAN at Cass City, home of Walbro...
Your result may vary, but Luis is THE MAN at Cass City, home of Walbro...
#154
RE: DLE What?!?!
Well maybe it is time for some of you Master engine guys to send in one of your engines and ask Walboro to design a carb just for us "airplane" guys. lol.
Until FADEC (fully automated digital engine control) comes out for our little gassers, us guys are just gonna have to twist the needles.
I don't mind. lol
Glenn Williams
Until FADEC (fully automated digital engine control) comes out for our little gassers, us guys are just gonna have to twist the needles.
I don't mind. lol
Glenn Williams
#156
Junior Member
Join Date: Sep 2009
Location: St. Joseph, TRINIDAD AND TOBAGO
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
RE: DLE What?!?!
The DLE 30 sold by Tower ... is real and very good. I recently bought one for my Mustang and it is a great engine. Powerful, starts easy and sounds good.
#157
Junior Member
Join Date: Sep 2009
Location: St. Joseph, TRINIDAD AND TOBAGO
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
RE: DLE What?!?!
The DLE 30 sold by Tower .... is the real thing. I recently bought one for my Mustang and it works great. Powerful, starts easy and sounds great. This is my third DLE from Tower .... and I am awaiting another order I just made for a DLE 55 for my TF Corsair. I am very pleased with DLE and I think you will be too.
#158
RE: DLE What?!?!
Guys:
Changing the subject entirely. I have a real simple question maybe some of you can expound on. Do any of you out there have a 1/3 scale spacewalker? Or know someon who does?
Here is my question. Is the DLE 30 enough engine for this plane?
Thanks
Glenn Williams
Changing the subject entirely. I have a real simple question maybe some of you can expound on. Do any of you out there have a 1/3 scale spacewalker? Or know someon who does?
Here is my question. Is the DLE 30 enough engine for this plane?
Thanks
Glenn Williams
#160
RE: DLE What?!?!
Thanks Antique:
I am not a 3D pilot. I believe planes should fly and helicopters should hover. I am old school. My aerobatic routine consists of loops & rolls and the occasional hammerheadetc. LOL
Glenn Williams
I am not a 3D pilot. I believe planes should fly and helicopters should hover. I am old school. My aerobatic routine consists of loops & rolls and the occasional hammerheadetc. LOL
Glenn Williams
#161
My Feedback: (1)
RE: DLE What?!?!
ORIGINAL: cloudancer03
you know something go ahead with HK but and I mean but you wont get any customer support.nada!as for tower not sure what to say and I have seen the price with ad promos drop it.but frankly I bought mine from valleyview rc and have regretted it.jodi is easily acessible will answer your questions and gives very good support.and to be honest it came down between jodi and syassa in nearby conn ecticut.both engines are extremely good.but alotof the other chinnese out there aint worth a whole lot in my opinon.my next purchase likely will be the dle 20.
you know something go ahead with HK but and I mean but you wont get any customer support.nada!as for tower not sure what to say and I have seen the price with ad promos drop it.but frankly I bought mine from valleyview rc and have regretted it.jodi is easily acessible will answer your questions and gives very good support.and to be honest it came down between jodi and syassa in nearby conn ecticut.both engines are extremely good.but alotof the other chinnese out there aint worth a whole lot in my opinon.my next purchase likely will be the dle 20.
#162
RE: DLE What?!?!
ORIGINAL: vertical grimmace
You mean you DID NOT regret it? VVRC is great to deal with.
ORIGINAL: cloudancer03
you know something go ahead with HK but and I mean but you wont get any customer support.nada!as for tower not sure what to say and I have seen the price with ad promos drop it.but frankly I bought mine from valleyview rc and have regretted it.jodi is easily acessible will answer your questions and gives very good support.and to be honest it came down between jodi and syassa in nearby conn ecticut.both engines are extremely good.but alotof the other chinnese out there aint worth a whole lot in my opinon.my next purchase likely will be the dle 20.
you know something go ahead with HK but and I mean but you wont get any customer support.nada!as for tower not sure what to say and I have seen the price with ad promos drop it.but frankly I bought mine from valleyview rc and have regretted it.jodi is easily acessible will answer your questions and gives very good support.and to be honest it came down between jodi and syassa in nearby conn ecticut.both engines are extremely good.but alotof the other chinnese out there aint worth a whole lot in my opinon.my next purchase likely will be the dle 20.
#163
Senior Member
Thread Starter
Join Date: Jan 2006
Location: MaranelloModena, ITALY
Posts: 646
Likes: 0
Received 0 Likes
on
0 Posts
RE: DLE What?!?!
Hey boys; this is the house for the Mintor 33... and this is also why this thread started...
Empty weigth: 3.500g; estimated MTOW: 5.500g; wingspan 1.87m;
Regards to all!!!
Guille
Empty weigth: 3.500g; estimated MTOW: 5.500g; wingspan 1.87m;
Regards to all!!!
Guille
#165
Senior Member
My Feedback: (14)
RE: DLE What?!?!
ORIGINAL: Tired Old Man
I had been discussing RCG/RCGF, not DLE.[:@] Valley View, Tower, and TBM all sell the same DLE, and are not restricted from factory direct purchasing.
The difference in pricing between them comes down to service, both customer and product. Which one do you think is going to take the best care of you and your engine if it ever needs service? Make you decision from there.
How good can the DLE 30 be? Better to ask how good you are because the engine, any engine, will never be any better than the person using it. If you are great the DLE 30 will be great. If you understand engines you'll never have a problem with the DLE 30. If you're a baffoon then it would not matter what you had because you'd screw it up regardless of quality level. There are a great many points in between.
I had been discussing RCG/RCGF, not DLE.[:@] Valley View, Tower, and TBM all sell the same DLE, and are not restricted from factory direct purchasing.
The difference in pricing between them comes down to service, both customer and product. Which one do you think is going to take the best care of you and your engine if it ever needs service? Make you decision from there.
How good can the DLE 30 be? Better to ask how good you are because the engine, any engine, will never be any better than the person using it. If you are great the DLE 30 will be great. If you understand engines you'll never have a problem with the DLE 30. If you're a baffoon then it would not matter what you had because you'd screw it up regardless of quality level. There are a great many points in between.
Finally, someone has managed to tell it like it truly is. Thank you, T.O.M.
Ed Cregger
P.S. Not that I don't have my buffoon moments from time to time too...
#167
RE: DLE What?!?!
ORIGINAL: Antique
I asked Luis Salas at Walbro that question a few years ago...NO ONE had Walbro design a carb for a specific model airplane engine...NO ONE...
Your result may vary, but Luis is THE MAN at Cass City, home of Walbro...
I asked Luis Salas at Walbro that question a few years ago...NO ONE had Walbro design a carb for a specific model airplane engine...NO ONE...
Your result may vary, but Luis is THE MAN at Cass City, home of Walbro...
http://nghengine.com/detail.asp?id=38
#169
Senior Member
Thread Starter
Join Date: Jan 2006
Location: MaranelloModena, ITALY
Posts: 646
Likes: 0
Received 0 Likes
on
0 Posts
RE: DLE What?!?!
ORIGINAL: jedijody
If you believe that maybe you'd be interested in my new120 HP, 5cc engine that'll spin a 32x10 prop at 9000 RPM. It has self adjusting mixture needles and a muffler that makes noise only dogs can hear.
If you believe that maybe you'd be interested in my new120 HP, 5cc engine that'll spin a 32x10 prop at 9000 RPM. It has self adjusting mixture needles and a muffler that makes noise only dogs can hear.
Can you send me one of those engines? I need one for my warp-speed 22 days-long mission HALE UAV...
#171
My Feedback: (16)
RE: DLE What?!?!
Believe it or not, there are chain saws now with a computer chip on the carb that self adjust the mixture.
http://www.husqvarna.com/us/landowne...6-xp-autotune/
http://www.husqvarna.com/us/landowne...6-xp-autotune/
#172
Senior Member
My Feedback: (1)
RE: DLE What?!?!
Self tuning is also possible with computer controlled fuel injection. I find it amusing there is the probability that some people would pay an extra $1,000.00 plus for an engine to avoid learning how to tune, or having to involve themselves in the process.
Andika,
If the WT 962 has been in existance longer than the engine you refer to, the carb was not made for the engine. If the carb is listed as fitting other engines in the Walbro carb/engine selection listings it was not made for an RC engine.
OTH, if the carb was made special for an RC engine, so what? Really now, in the larger scope of giant scale RC, just how important is a 17cc engine? How much help will that carb provide to the thousands of people using 50cc to 300cc+ engines? Next, do they really need any help? Most people I have met that learn something about their engines have few or no issues with the carbs they already have.
We all understand you're shilling for some Chinese manufacturer trying to develop a market for their products by using this forum for exposure. It would be better if you or NGH provided seme proof, from Walbro, to back your claim instead of linking to a manufacturer's advertisiment.
Andika,
If the WT 962 has been in existance longer than the engine you refer to, the carb was not made for the engine. If the carb is listed as fitting other engines in the Walbro carb/engine selection listings it was not made for an RC engine.
OTH, if the carb was made special for an RC engine, so what? Really now, in the larger scope of giant scale RC, just how important is a 17cc engine? How much help will that carb provide to the thousands of people using 50cc to 300cc+ engines? Next, do they really need any help? Most people I have met that learn something about their engines have few or no issues with the carbs they already have.
We all understand you're shilling for some Chinese manufacturer trying to develop a market for their products by using this forum for exposure. It would be better if you or NGH provided seme proof, from Walbro, to back your claim instead of linking to a manufacturer's advertisiment.
#173
RE: DLE What?!?!
ORIGINAL: jedijody
If you believe that maybe you'd be interested in my new120 HP, 5cc engine that'll spin a 32x10 prop at 9000 RPM. Ithas self adjusting mixture needlesand a muffler that makes noise only dogs can hear.
If you believe that maybe you'd be interested in my new120 HP, 5cc engine that'll spin a 32x10 prop at 9000 RPM. Ithas self adjusting mixture needlesand a muffler that makes noise only dogs can hear.
#174
RE: DLE What?!?!
ORIGINAL: w8ye
Believe it or not, there are chain saws now with a computer chip on the carb that self adjust the mixture.
http://www.husqvarna.com/us/landowne...6-xp-autotune/
Believe it or not, there are chain saws now with a computer chip on the carb that self adjust the mixture.
http://www.husqvarna.com/us/landowne...6-xp-autotune/
#175
Senior Member
My Feedback: (4)
Join Date: Jul 2002
Location: Somewhere,
DC
Posts: 9,825
Likes: 0
Received 0 Likes
on
0 Posts
RE: DLE What?!?!
I have a called Mr Luis Salas at Walbro in Cass City, Michigan to find out about a WT962...When the call is answered I will report back..
The carb is not listed on the Walbro web site..
The carb is not listed on the Walbro web site..