BAMF90

My Feedback: (1)

What are the name of these wheels? Where can I find them? And not to make anyone mad but will they fit the Fun Factor?

http://cgi.ebay.com/ws/eBayISAPI.dll...category=19168

azzman

They are thunder tiger rims and it looks like they will fit the funfactor as they fit Tamiya so must have a 12mm hex.

BAMF90

My Feedback: (1)

Thanks, where can I find them? as you can see the auction has ended on ebay

alvinl

I did some searching and cannot find those exact wheels. Try calling them. Their website is http://www.acehobby.com/ace/index.htm

Scouser

Perhaps if ilikenitrorccars did some searching, he wouldn't have to ask so many questions. There is a post in the other thread you started about wheels where there is a direct link to google. Give it a click.

BAMF90

My Feedback: (1)

Scouser, I wouldnt ask questions if GOOGLE gave me the answers!

poor judgement

my usual way of finding hard to obtain bits is to download the kit manual and get the part numbers of the items i need and then run a search for the part number/s.

yea, i have a shedload of manuals in my documents... no thunder tiger ones tho - sorry, u will have to find that urself - or a thunder tiger forum where people are likely to know about thunder tiger parts and/or part numbers.

not being funny, just trying to help u out

mulletman

just a question will [link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXCAN2&P=7]these[/link] and [link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXDT99&P=7]these[/link] work together?

rolland

Yes the should work with no problems.




rolland

mulletman

ok thanks i couldnt find the width[]

alvinl

Looking at buying sand paws. You getting ready for winter?

mulletman

ya, and my dad owns a gravel pit and a sand pit

rolland

Pretty much all of the 2.2 wheels and tires are the same width. Imex sells some off the wall sizes but to the best of my knowledge Ofna and Proline only have standard 2.2 size wheels/tires.



rolland

BAMF90

My Feedback: (1)

Another wheels question!!!

These ( http://www2.towerhobbies.com/cgi-bin...?&I=LXDAE3&P=7 ) wheels are for the t-maxx, which are supposedly 14mm hex hubs, but these wheels are said to be 12mm hex hubs towards the bottom of the page. That means these shoud fit a fun factor mt2 right?

poor judgement

they may fit the hex, unless its a typo... trouble is, with that kind of offset, the wheels will hit the body and maybe the pipe when turning.

did u read the posts that i posted links to regarding fitting tmaxx wheels?

azzman

Yea those wheels arent for the Tmaxx they are for the stadium max so maybe the hub is a different size as nowhere there does it say they will fit a Tmaxx.
But PJ is correct in what he says, you will need something with more offset. [] Good try tho...

BAMF90

My Feedback: (1)

It says toward the middle of the page though that these are suitible for the E-Maxx and T-Maxx.

BAMF90

My Feedback: (1)

These wheels should fit the Fun Factor MT2 right? http://www2.towerhobbies.com/cgi-bin...?&I=LXCAN2&P=7

azzman

Yea they do say they will fit the TMaxx so in that case I would again agree with PJ and say that there is error in their specs, so they should be 14mm hex.
Those OFNA wheels should fit no worries.

dj2_7

ilikenitrorc do you have a funfactor

BAMF90

My Feedback: (1)

No but I am planning on buying one or the New Magnum NX very soon.

dj2_7

OK if you are that worried about the rims you might want to get a t-maxx. They have an endless supply of wheels for them. I like the cen a whole lot more but as far as customization goes there isn't a whole lot you can do.

BAMF90

My Feedback: (1)

Wheels arent that important so i shouldnt worry.

dj2_7

exactly