THE LOUNGE 2
RE: THE LOUNGE 2
Yeah, as long as you don't hit me...
I now know how to upload the video to YouTube in the widescreen format.. it will look good!!
ORIGINAL: AutoXMan
Yeah that's due to the high KV brushless motor. I will see if LB can take a video with his video camera.
Yeah that's due to the high KV brushless motor. I will see if LB can take a video with his video camera.
RE: THE LOUNGE 2
Why does it keep getting loose?! Can't put some threadlock?
ORIGINAL: Longhair
It's the TA01/02 that I've had for a long while now.
The reason for the gear diff is because when BE8 & BF3 break loose, there is no more power going to the rear wheels and it's a pain especially 5 minutes after starting.
I ended up putting the same parts as the front diff and dropped it in the rear.
It's the TA01/02 that I've had for a long while now.
The reason for the gear diff is because when BE8 & BF3 break loose, there is no more power going to the rear wheels and it's a pain especially 5 minutes after starting.
I ended up putting the same parts as the front diff and dropped it in the rear.
RE: THE LOUNGE 2
ORIGINAL: Longhair
Is there anything other than dropping a battery in it?
ORIGINAL: AutoXMan
My F-117 nighthawk r/c plane ships today sweet.
My F-117 nighthawk r/c plane ships today sweet.
Senior Member
Join Date: Apr 2007
Location: Thousand Oaks,
CA
Posts: 8,958
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
who makes it? Those EDF jet fighters look real nice, i do agree the real high pitched wine is slightly annoing but whatever, its all worth it [8D]
Senior Member
Join Date: Dec 2005
Location: NA, , NETHERLANDS
Posts: 4,194
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
ORIGINAL: Lunchboxer
Why does it keep getting loose?! Can't put some threadlock?
Why does it keep getting loose?! Can't put some threadlock?
I don't think diff grease and threadlock would go together too well.
Senior Member
Join Date: Apr 2007
Location: Thousand Oaks,
CA
Posts: 8,958
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
if it is plastic threadlock + plastic is a BAD combo, ya, thats the problem with ball diffs, they loose setting real fast, run it some, tighten, run some more, tighten, repeat numerous times and then it may help? Also once you get the setting you like, put some CA on the threads of the set screw to hold the setting[8D]
RE: THE LOUNGE 2
RE: THE LOUNGE 2
I just had my ex-colleague ordered 2 of these touchscreen thermostats for me.. (a pretty big employee discount)
http://yourhome.honeywell.com/Consum...en/Default.htm
Figured that if my RC chargers are backlited, shouldn't my thermostats look at least as nice?!
RE: THE LOUNGE 2
Not selling the house anytime soon!! (market = bad!)
But I just want to add some bling factor!! Backlited + touchscreen!! And since it is programmable, you can argue that it saves some energy.. ha!
But yeah, good deal.. I got them for less than 1/2 of the list price due to the employee discount!! SWEET!
But I just want to add some bling factor!! Backlited + touchscreen!! And since it is programmable, you can argue that it saves some energy.. ha!
But yeah, good deal.. I got them for less than 1/2 of the list price due to the employee discount!! SWEET!
Senior Member
Join Date: Dec 2005
Location: Batavia,
IL
Posts: 10,314
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
ORIGINAL: AutoXMan
I also am building this jet right now...
http://shop.sapacamerica.com/browse.cfm/4,1208.html
I also am building this jet right now...
http://shop.sapacamerica.com/browse.cfm/4,1208.html
Senior Member
Join Date: Dec 2005
Location: Siberia, CANADA
Posts: 3,696
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
ORIGINAL: Lunchboxer
I just had my ex-colleague ordered 2 of these touchscreen thermostats for me.. (a pretty big employee discount)
http://yourhome.honeywell.com/Consum...en/Default.htm
Figured that if my RC chargers are backlited, shouldn't my thermostats look at least as nice?!
I just had my ex-colleague ordered 2 of these touchscreen thermostats for me.. (a pretty big employee discount)
http://yourhome.honeywell.com/Consum...en/Default.htm
Figured that if my RC chargers are backlited, shouldn't my thermostats look at least as nice?!
Boo....
RE: THE LOUNGE 2
Yeah, I got 50%+ off... so I can in theory re-sale them.. LOL!
But nah, since I don't work there anymore, I am asking a former colleague to order it for me.. so not gonna do this often.. ha!
My old company also owns Garrett Turbo.. so I actually bought 2 turbos for a friend of mine once for his project car.. the deal was awesome.. one can really get some serious cash if I were to re-sell those!
I gave it to my friend for cost, of course.. ha! [:'(]
But nah, since I don't work there anymore, I am asking a former colleague to order it for me.. so not gonna do this often.. ha!
My old company also owns Garrett Turbo.. so I actually bought 2 turbos for a friend of mine once for his project car.. the deal was awesome.. one can really get some serious cash if I were to re-sell those!
I gave it to my friend for cost, of course.. ha! [:'(]
Senior Member
Join Date: Nov 2006
Location: Stockton-on-TeesEngland, UNITED KINGDOM
Posts: 5,476
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
ORIGINAL: Lunchboxer
Yeah, I got 50%+ off... so I can in theory re-sale them.. LOL!
But nah, since I don't work there anymore, I am asking a former colleague to order it for me.. so not gonna do this often.. ha!
My old company also owns Garrett Turbo.. so I actually bought 2 turbos for a friend of mine once for his project car.. the deal was awesome.. one can really get some serious cash if I were to re-sell those!
I gave it to my friend for cost, of course.. ha! [:'(]
Yeah, I got 50%+ off... so I can in theory re-sale them.. LOL!
But nah, since I don't work there anymore, I am asking a former colleague to order it for me.. so not gonna do this often.. ha!
My old company also owns Garrett Turbo.. so I actually bought 2 turbos for a friend of mine once for his project car.. the deal was awesome.. one can really get some serious cash if I were to re-sell those!
I gave it to my friend for cost, of course.. ha! [:'(]
LB never told us this before lol
Senior Member
Join Date: Dec 2005
Location: NA, , NETHERLANDS
Posts: 4,194
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
That was the nice thing about working in manufacturing - deep discounts [sm=greedy.gif]
I used to be able to get brakes (2x rotors, 2x drums,2x pads and 2x shoes) for the cost of 1 rotor at the parts store.
I used to be able to get brakes (2x rotors, 2x drums,2x pads and 2x shoes) for the cost of 1 rotor at the parts store.