FS/HK-GT2 tx problem?
#1
Junior Member
Thread Starter
Join Date: Mar 2012
Location: perth, AUSTRALIA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
FS/HK-GT2 tx problem?
Last week my FS/HK-GT2 came in the mail and i set it up. Was working until today when i went to turn it on BUT...it didnt.
SO...i have changed the batts, opened it up to check for broken solder joints and wires (Fine), used two other working battery packs from other transmitters.
NONE have worked..
It hasn't been droped, or misstreated. Only used twice.
I can mabey return it, but that will take time and that means i cant run my truggy for a while.
I disconected the batt pack yesterday night (working at the time) to see if my lipo plugs would fit.
i compared the lipo plug to the tx plug, i new it wouldn't fit, so i didnt bother trying to fit it. I connected the AA batt pack up didnt turn it on and left it.
anyone got any suggestions to fix my tx problem.....?
cheers
liam.
SO...i have changed the batts, opened it up to check for broken solder joints and wires (Fine), used two other working battery packs from other transmitters.
NONE have worked..
It hasn't been droped, or misstreated. Only used twice.
I can mabey return it, but that will take time and that means i cant run my truggy for a while.
I disconected the batt pack yesterday night (working at the time) to see if my lipo plugs would fit.
i compared the lipo plug to the tx plug, i new it wouldn't fit, so i didnt bother trying to fit it. I connected the AA batt pack up didnt turn it on and left it.
anyone got any suggestions to fix my tx problem.....?
cheers
liam.