my servo going the opposite direction, please help
#1
Junior Member
Thread Starter
Join Date: Sep 2003
Location: Nagoya, JAPAN
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
my servo going the opposite direction, please help
I have sanwa M8 with RX211 receiver, and SX162-T servo for both steering and throttle. for switch, I use DSC switch from sanwa M8 box. the problem is, both steering and throttle servo is going at the opposite direction. When I turn left on my remote, the car is going right direction, so is the throttle, the car is braking when I press the accelerator.
anyone can help, please. I am a beginner, it`s my first Nitro RC car.
anyone can help, please. I am a beginner, it`s my first Nitro RC car.
#3
Junior Member
Thread Starter
Join Date: Sep 2003
Location: Nagoya, JAPAN
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
RE: my servo going the opposite direction, please help
thanks for the reply.
The throttle and steering linkage will be too long if I turn the servo, and I didn`t get any extra linkage from the Kit box.
is there any possibility because of some setting on the transmitter?
(I have the M8 manual, but it`s all in japanese, I can not read it)
The throttle and steering linkage will be too long if I turn the servo, and I didn`t get any extra linkage from the Kit box.
is there any possibility because of some setting on the transmitter?
(I have the M8 manual, but it`s all in japanese, I can not read it)
#5
Junior Member
Thread Starter
Join Date: Sep 2003
Location: Nagoya, JAPAN
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
RE: my servo going the opposite direction, please help
thanks slodsm, you are right.
I found the reversing function on my M8, now my servo working on the right direction.
thanks everybody.
I found the reversing function on my M8, now my servo working on the right direction.
thanks everybody.