Please, help to me (to select turbines)!!!
#1
Senior Member
Thread Starter
Join Date: Nov 2004
Location: Dnipropetrovsk, UKRAINE
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Please, help to me (to select turbines)!!!
Hello respected colleagues!
I dwell in Ukraine (Europe), in my country no neither turbines, nor people which one can to me help.... It is a pity...
Before me it is necessary a problem, what to purchase the turbine? (I have in view of - sire? The corporation? Quality? Service?)!!!
And main: the price!??
What yardsticks? I have a lot of problems!???
Please, help to execute{*come true*} dream of my childhood!
I dwell in Ukraine (Europe), in my country no neither turbines, nor people which one can to me help.... It is a pity...
Before me it is necessary a problem, what to purchase the turbine? (I have in view of - sire? The corporation? Quality? Service?)!!!
And main: the price!??
What yardsticks? I have a lot of problems!???
Please, help to execute{*come true*} dream of my childhood!
#2
Join Date: Nov 2003
Location: Curitiba, Parana, BRAZIL
Posts: 4,289
Likes: 0
Received 14 Likes
on
11 Posts
RE: Please, help to me (to select turbines)!!!
Hi Alex, the selection on the turbine depends on how much you would like to expend and how much thrust you want, what model jet you have in mind?
Regards, Enrique
Regards, Enrique
#3
Senior Member
Thread Starter
Join Date: Nov 2004
Location: Dnipropetrovsk, UKRAINE
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
RE: Please, help to me (to select turbines)!!!
Hello erbroens!
You ask what model? I think model there will be a wing span not less than 200 cm.
I think that the engine 80-120 series....
You ask what model? I think model there will be a wing span not less than 200 cm.
I think that the engine 80-120 series....
#4
Join Date: Oct 2003
Location: Dunstable, UNITED KINGDOM
Posts: 3,601
Likes: 0
Received 0 Likes
on
0 Posts
#5
RE: Please, help to me (to select turbines)!!!
dobrae utra Alex
i will suggest you to buy JetCat. i have 3 of them (P-80, P-120 and P160) and they run without problems and the service is very good in Germany.
My preference will go to a P-160 [>:], ok is expensive [], but you get a lot of power, and quite an immediate response to throttle changes.
And if you don't need 16 kg of thrust, just reduce the maximal RPm and you get less....
Alessio
i will suggest you to buy JetCat. i have 3 of them (P-80, P-120 and P160) and they run without problems and the service is very good in Germany.
My preference will go to a P-160 [>:], ok is expensive [], but you get a lot of power, and quite an immediate response to throttle changes.
And if you don't need 16 kg of thrust, just reduce the maximal RPm and you get less....
Alessio
#6
My Feedback: (2)
Join Date: Apr 2002
Location: Strathcona county,
AB, CANADA
Posts: 5,394
Received 0 Likes
on
0 Posts
RE: Please, help to me (to select turbines)!!!
There are lots of turbines manufactured in Europe, so service and availablitly should be great for you...some of the names that come to mind (in no paticular order..) Artes, SimJet, JetCat, AMT, Wren..there are probably more, but that will get you started on your research. If you extend your search offshore (for you) there is (again in no particular order..) PST, TJT, FTE, and BMT...again there are no doubt some that I missed...
#7
Join Date: Nov 2003
Location: Curitiba, Parana, BRAZIL
Posts: 4,289
Likes: 0
Received 14 Likes
on
11 Posts
RE: Please, help to me (to select turbines)!!!
Hi Alex, you can´t choose a turbine based only on the model´s wingspan, do you have a pic of the model with his specs? are you designing it?
Rgds, Enrique
Rgds, Enrique
#8
Senior Member
Thread Starter
Join Date: Nov 2004
Location: Dnipropetrovsk, UKRAINE
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
RE: Please, help to me (to select turbines)!!!
swissflyer,
You have said " dobrae utra Alex "
You have said " dobrae utra Alex "
You speak JetCat 160, yes, it is power!
But the Large airplane is necessary for this turbine! As I yet did not have turbines, I shall begin with simple.
But I think with support of the specialists! (I have in view of - you and other people which one perceive in turbines.
But I do not know from what to begin??? To operate{*control*} airplanes and helicopters I know how well, I trained the people to operate{*control*} models R/C.
That is, the experience is. But not jet!
I liked model on a site - www.simjet.com/service.htm
It is possible to see if to load - " George Delmoral Facet 1200 ", the Airplane is simple in manufacturing.
It is necessary to begin my judgement, that from it. And what you will say?
#9
Senior Member
My Feedback: (2)
RE: Please, help to me (to select turbines)!!!
Hi AlexJet
If you like the Faset...well then go get one . It is a gerat flying airplane. But if it was me I would go for the Faset 2300 and maybe with a Simjet 1200 one it.
The Faset is sold by the US dealer for SimJet. But SimJet in Denmark can get it for you. If you contact SimJet. I am sure that they will do anyting they can to help you.
For more info:
http://www.simjet.com/
http://www.greatnorthernmodels.com/
If you like the Faset...well then go get one . It is a gerat flying airplane. But if it was me I would go for the Faset 2300 and maybe with a Simjet 1200 one it.
The Faset is sold by the US dealer for SimJet. But SimJet in Denmark can get it for you. If you contact SimJet. I am sure that they will do anyting they can to help you.
For more info:
http://www.simjet.com/
http://www.greatnorthernmodels.com/
#11
Senior Member
Thread Starter
Join Date: Nov 2004
Location: Dnipropetrovsk, UKRAINE
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
RE: Please, help to me (to select turbines)!!!
Hi friends!
I again have a lot of problems!
Problem number 1: I not precisely perceive, in what distinction{*difference*} between???
- TURBINES WITH SIMJET FADEC?
- TURBINES WITH GASPAR FADEC?
Problem number 2: Where it is possible to take a delineation of an airplane - George Delmoral Facet 1200?
The friends, you have convinced me that it is necessary at once to purchase the turbine medium-sized! For example
P120 Or SimJet 2300! The power reserve is always well! Poorly when her{*it*} does not suffice....
I think that for starting this airplane good!?
Problem number 3:
Where it is possible download an engine start-up?
I again have a lot of problems!
Problem number 1: I not precisely perceive, in what distinction{*difference*} between???
- TURBINES WITH SIMJET FADEC?
- TURBINES WITH GASPAR FADEC?
Problem number 2: Where it is possible to take a delineation of an airplane - George Delmoral Facet 1200?
The friends, you have convinced me that it is necessary at once to purchase the turbine medium-sized! For example
P120 Or SimJet 2300! The power reserve is always well! Poorly when her{*it*} does not suffice....
I think that for starting this airplane good!?
Problem number 3:
Where it is possible download an engine start-up?
#12
My Feedback: (29)
Join Date: Jan 2002
Location: Hamilton,
ON, CANADA
Posts: 1,436
Likes: 0
Received 0 Likes
on
0 Posts
RE: Please, help to me (to select turbines)!!!
ORIGINAL: AlexJet
Hi friends!
I again have a lot of problems!
Problem number 1: I not precisely perceive, in what distinction{*difference*} between???
- TURBINES WITH SIMJET FADEC?
- TURBINES WITH GASPAR FADEC?
Problem number 2: Where it is possible to take a delineation of an airplane - George Delmoral Facet 1200?
The friends, you have convinced me that it is necessary at once to purchase the turbine medium-sized! For example
P120 Or SimJet 2300! The power reserve is always well! Poorly when her{*it*} does not suffice....
I think that for starting this airplane good!?
Problem number 3:
Where it is possible download an engine start-up?
Hi friends!
I again have a lot of problems!
Problem number 1: I not precisely perceive, in what distinction{*difference*} between???
- TURBINES WITH SIMJET FADEC?
- TURBINES WITH GASPAR FADEC?
Problem number 2: Where it is possible to take a delineation of an airplane - George Delmoral Facet 1200?
The friends, you have convinced me that it is necessary at once to purchase the turbine medium-sized! For example
P120 Or SimJet 2300! The power reserve is always well! Poorly when her{*it*} does not suffice....
I think that for starting this airplane good!?
Problem number 3:
Where it is possible download an engine start-up?
2. If you plan to have only one engine, it is a good idea to get one in a size that you will be able to use for future airframes. If you plan to stay with smaller airframes, you can do the 700 or 1200. If you plan on going with larger, you can use the 2300 or even the 3000.
#13
Senior Member
Thread Starter
Join Date: Nov 2004
Location: Dnipropetrovsk, UKRAINE
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
RE: Please, help to me (to select turbines)!!!
KAPTAN KAOS,
- TURBINES WITH SIMJET FADEC?
- TURBINES WITH GASPAR FADEC?
- TURBINES WITH SIMJET FADEC?
- TURBINES WITH GASPAR FADEC?
But sires miscellaneous???
So?
#15
Senior Member
Thread Starter
Join Date: Nov 2004
Location: Dnipropetrovsk, UKRAINE
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
RE: Please, help to me (to select turbines)!!!
The engines are the same, the controller is different.
And again there is a problem..... Than What it is better and than better?
#16
RE: Please, help to me (to select turbines)!!!
Alex,
On Simjets with Gaspar's ECU, the operator has more freedom to "play" with the engine's parameters, than with the Simjet ECU.
The Espiell FADEC gives you total control on what you want your engine to do, yet, you are fully "responsible" if something wrong happens due to your control inputs.
Chris
On Simjets with Gaspar's ECU, the operator has more freedom to "play" with the engine's parameters, than with the Simjet ECU.
The Espiell FADEC gives you total control on what you want your engine to do, yet, you are fully "responsible" if something wrong happens due to your control inputs.
Chris