RC flat bottom K boat
#2
My Feedback: (51)
Expresscraft(Tom) had one that he offered to someone.He may be able to make you one if he still has the molds. Other than that the Dumas 36" SK Daddle is as close as you'll come for K boat. If you want it larger buy the kit and trace the parts onto 36" wide plan paper and get them enlarged to the size you want.You could then build the 36" version or sell the unused kit to someone else. http://www.dumasproducts.com/product...roducts_id=416
#3
My Feedback: (51)
Here's one from Marty's R/C Boat site that was enlarged to a 47" SK Daddle(gold and white boat) with a Stihl engine in it. The pic of the hulls on the rack(won't enlarge) shows the bottoms of a flatbottom drag boat.I think in a post on RC Dragboats that someone eliminated the center flat,which left a bigger tunnel to get more lift and speed quicker.The white boat with red trim is a 36" Daddle with a chainsaw engine in it hooked to a W drive.Looks like too much engine for that size boat.
Last edited by Tidnab; 08-14-2015 at 03:27 PM. Reason: Added pics and changed content.