gabbyb3

Hi, in need of help setting up my radio for a trex i just gott. Also was wondering about setting blade pitch for hovering, as i have not flown a heli in a while ..

madmorgan

My Feedback: (2)

all the pitch info should be in the size trex manual your setting up google say trex 450 manual if its a 450 you have 500 etc etc then all you do is light up heli with motor unplugged check the pitch at low mid and high pitch ranges i think 450 is usually between 2-5 degree on low in normal mid stick 0-+2 and high +9-12 idle up -9-12 low +9-12 high .

R.C.Man

I set mid stick for 0 pitch (50% on the Dx6i)in the menu, If your using normal flight mode (no Idle up) set your pitch curve for -2deg to 0deg till mid stick, than 75, 100%
Throttle curve for a easy flight, 75% from 50% pitch. Or your likings for headspeed. 0,25,75,75,75%
Good Luck man.