Revo noise while starting
#1
Senior Member
Thread Starter
Join Date: Dec 2005
Location: Lock Haven,
PA
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
While starting my Revo with the ezstart there seems to be a ratting noise. Starts fine.
Is this coming from the ezstart or oneway bearing?
I plan on taking apart. What should I be looking for?
What prventive maintanence should I take in keeping the ezstart starter/one way bearing working good?
Is this coming from the ezstart or oneway bearing?
I plan on taking apart. What should I be looking for?
What prventive maintanence should I take in keeping the ezstart starter/one way bearing working good?
#2
Senior Member
Join Date: Nov 2005
Location: , MI
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
Could be the one way. Just open it up. Check everything make sure it looks ok.
Remove the one way. Clean it with Wd-40 real well. They dip it in motor oil then re assembly.
Your lucky if this is your first own way bearing maintenance. I have to clean mine every 1/2gallon - gallon of fuel.
Remove the one way. Clean it with Wd-40 real well. They dip it in motor oil then re assembly.
Your lucky if this is your first own way bearing maintenance. I have to clean mine every 1/2gallon - gallon of fuel.
#3
Senior Member
Join Date: Jan 2006
Location: Tallahassee,
FL
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
I believe the clutchbell rattles a little at idle also. makes a ding-ding sound, barely noticable at idle. This is not a problem.