RCU Forums
The turret of the Maxxpro also had the machine gun hanging down and the turret armor dislodged.
The turret of the Maxxpro also had the machine gun hanging down and the turret armor dislodged.
0 2020/10/29 17:37:03
0 2020/10/29 17:37:09
0 2020/10/29 17:37:15
0 2020/10/29 17:37:20
0 2020/10/29 17:37:26
0 2020/10/29 17:37:31
0 2020/10/29 17:37:36
0 2020/10/29 17:37:41
0 2020/10/29 17:37:47
0 2020/10/29 17:42:06
0 2020/10/29 17:42:10
0 2020/10/29 17:42:14
0 2020/10/29 17:42:20
0 2020/10/29 17:42:25
0 2020/10/29 17:42:31
0 2020/10/29 17:42:36
0 2020/10/29 17:42:41
0 2020/10/29 17:42:46
0 2020/10/29 17:42:51
0 2020/10/29 17:42:55
The two MRAPs fresh from the two outer boxes.
The two MRAPs fresh from the two outer boxes.
0 2020/10/29 17:43:27
Just as they were removed from the retail packaging. The M-ATV doors were both broken off, the Maxxpro passenger door was off, and there was a small rectangular piece of plastic floating around in the M-ATV box. I didn't find out what it went to until later.
Just as they were removed from the retail packaging. The M-ATV doors were both broken off, the Maxxpro passenger door was off, and there was a small rectangular piece of plastic floating around in the M-ATV box. I didn't find out what it went to until later.
0 2020/10/29 17:43:31
Better shot of the Maxxpro door. Both the vehicle and door hinges are made from PE with metal pins. I was able to straighten the PE and re-install the pins.
Better shot of the Maxxpro door. Both the vehicle and door hinges are made from PE with metal pins. I was able to straighten the PE and re-install the pins.
0 2020/10/29 17:43:36
All of the accessories for the Maxxpro came out of the baggie they were in and were floating around inside the plastic packaging. Luckily none broke.
All of the accessories for the Maxxpro came out of the baggie they were in and were floating around inside the plastic packaging. Luckily none broke.
0 2020/10/29 17:43:41
The Maxxpro turret armor and machine gun were dislodged in shipping. I was able to pop them back in place easily.
The Maxxpro turret armor and machine gun were dislodged in shipping. I was able to pop them back in place easily.
0 2020/10/29 17:43:46
M-ATV doors. Hinges on the M-ATV are plastic on the doors and the vehicle with metal pins.
M-ATV doors. Hinges on the M-ATV are plastic on the doors and the vehicle with metal pins.
0 2020/10/29 17:43:52
Closeup of the broken passenger M-ATV hinges.
Closeup of the broken passenger M-ATV hinges.
0 2020/10/29 17:43:57
Closeup of the broken drivers M-ATV hinges.
Closeup of the broken drivers M-ATV hinges.
0 2020/10/29 17:44:02
Closeup of the broken passenger M-ATV hinges.
Closeup of the broken passenger M-ATV hinges.
0 2020/10/29 17:44:07
Repaired M-ATV driver side door.
Repaired M-ATV driver side door.
0 2020/10/29 17:44:13
Repaired passenger M-ATV door. Both were fixed with some Tamiya thin solvent since they were plastic.
Repaired passenger M-ATV door. Both were fixed with some Tamiya thin solvent since they were plastic.
0 2020/10/29 17:44:18
Found where the rectangular piece of plastic broke off of. A little Tamiya thin solvent and it was fixed.
Found where the rectangular piece of plastic broke off of. A little Tamiya thin solvent and it was fixed.
0 2020/10/29 17:44:24
I haven't pull all of the Maxxpro accessories on yet, but they are now all repaired to my satisfaction.
I haven't pull all of the Maxxpro accessories on yet, but they are now all repaired to my satisfaction.
0 2020/10/29 17:44:28
I wouldn't personally mount the wheel there because that is where one of the water or fuel cans typically sits, but that's just me. That on the extended bustle rack which the Tamiya kit doesn't have anyway.
I wouldn't personally mount the wheel there because that is where one of the water or fuel cans typically sits, but that's just me. That on the extended bustle rack which the Tamiya kit doesn't have anyway.
0 2020/11/06 01:18:05
Mantlet rain cover fabbed out of brass sheet. Hinges are a little oversized, but I wanted to make sure they would stand up to R/C use.
Mantlet rain cover fabbed out of brass sheet. Hinges are a little oversized, but I wanted to make sure they would stand up to R/C use.
0 2020/11/14 11:06:32
Battle system, volume, and main power switch hidden under the hatch.
Battle system, volume, and main power switch hidden under the hatch.
0 2020/11/14 11:06:37
0 2020/11/14 11:06:41
This is the before shot. It takes a phillips head screwdriver inserted into the small center hole in the idler to remove the screw holding the idler on.
This is the before shot. It takes a phillips head screwdriver inserted into the small center hole in the idler to remove the screw holding the idler on.
0 2020/11/22 15:24:44
Shown installed. The lower hex head didn't come with any nuts to hold them in so I supplied my own M3 nuts which went on the inside.
Shown installed. The lower hex head didn't come with any nuts to hold them in so I supplied my own M3 nuts which went on the inside.
0 2020/11/22 15:24:48
Bottom shot of the brace/idler assembly.
Bottom shot of the brace/idler assembly.
0 2020/11/22 15:24:52
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.