RCU Forums
0 2020/11/29 13:28:14
0 2020/11/29 13:28:22
0 2020/11/29 13:28:47
0 2020/11/29 13:29:19
0 2020/11/29 13:29:37
0 2020/11/29 13:30:03
0 2020/11/29 13:36:58
1/35 to 1/16 is 219% to make life easy used 220% , less than 1% out.
1/35 to 1/16 is 219% to make life easy used 220% , less than 1% out.
0 2020/12/04 03:01:45
Main turret sides done
Main turret sides done
0 2020/12/04 03:01:54
The 37mm cannon elevation assembly
The 37mm cannon elevation assembly
0 2020/12/04 03:02:02
Hard part now turret roof and detail
Hard part now turret roof and detail
0 2020/12/04 03:02:12
Tubes glued in to support cannon and brass for the 37mm cannons.
Tubes glued in to support cannon and brass for the 37mm cannons.
0 2020/12/04 03:09:46
Beefed up cannon support tubes.
Beefed up cannon support tubes.
0 2020/12/05 03:43:40
Brass for muzzle and the shaped part on elevation unit.
Brass for muzzle and the shaped part on elevation unit.
0 2020/12/05 03:44:16
Muzzle and shaped barrel support made, trying to copy plastic kit part.
Muzzle and shaped barrel support made, trying to copy plastic kit part.
0 2020/12/05 03:45:16
Styrene roof parts fitted and started detailHatches fitted .
Styrene roof parts fitted and started detailHatches fitted .
0 2020/12/05 03:47:13
Hatches fitted and rain guards made with thin brass rod.Will use BLUESTUFF to make a mould for the smoke/ grenade launcher.
Hatches fitted and rain guards made with thin brass rod.Will use BLUESTUFF to make a mould for the smoke/ grenade launcher.
0 2020/12/05 03:48:10
This part will be hard , should be thinking about buying a 3D printer.
This part will be hard , should be thinking about buying a 3D printer.
0 2020/12/05 03:49:27
Styrene tubes spaced out and centre filled with epoxy then cleanup. Need to catch some parts that are not square or level before painting.
Styrene tubes spaced out and centre filled with epoxy then cleanup. Need to catch some parts that are not square or level before painting.
0 2020/12/05 03:50:48
Periscope covers in brass and some plastic coated wire for handles, may strip the plastic off if they look oversize before painting.
Periscope covers in brass and some plastic coated wire for handles, may strip the plastic off if they look oversize before painting.
0 2020/12/05 03:52:52
Rear hatch and some filler to tidy up some issues.
Rear hatch and some filler to tidy up some issues.
0 2020/12/05 03:57:20
Found a gearwheel same size as the elevation drum, made the elevation easy to fit. Continuous servo for recoil
Found a gearwheel same size as the elevation drum, made the elevation easy to fit. Continuous servo for recoil
0 2020/12/06 05:22:04
Cut slots in muzzle brake , need a clean up.
Cut slots in muzzle brake , need a clean up.
0 2020/12/06 05:25:24
Added round sprue to detail the bolts , need to buy some plastic bolt head kits
Added round sprue to detail the bolts , need to buy some plastic bolt head kits
0 2020/12/06 05:26:10
Hull red on forgot to fix some areas that are not square.
Hull red on forgot to fix some areas that are not square.
0 2020/12/06 05:27:36
Dark yellow on the parts not needing fixed then filler and hull red again
Dark yellow on the parts not needing fixed then filler and hull red again
0 2020/12/06 05:29:09
Will end up as one of these two camo patterns
Will end up as one of these two camo patterns
0 2020/12/07 05:16:31
Tamiya dark yellow 2 , light coats want some hull red showing thro in places.
Tamiya dark yellow 2 , light coats want some hull red showing thro in places.
0 2020/12/07 05:17:38
Tamiya dark green 2 front , German grey for the barrels
Tamiya dark green 2 front , German grey for the barrels
0 2020/12/07 05:18:41
Want to show the interlocking plates, if its a mess doing them at least can paint over again .
Want to show the interlocking plates, if its a mess doing them at least can paint over again .
0 2020/12/07 05:19:55
Rear green needs a touch up or just say its wear from in and out of the hatch.
Rear green needs a touch up or just say its wear from in and out of the hatch.
0 2020/12/07 05:20:12
Marked out started to make the interlocking .
Marked out started to make the interlocking .
0 2020/12/07 07:54:54
First side almost done , need to look for a file thats the right shape.
First side almost done , need to look for a file thats the right shape.
0 2020/12/07 07:56:20
0 2020/12/07 09:27:26
Some paint on to see how it looks
Some paint on to see how it looks
0 2020/12/07 09:34:20
2nd side is better found a little file with a wider tip to clean up the cut marks.
2nd side is better found a little file with a wider tip to clean up the cut marks.
0 2020/12/07 09:34:52
0 2020/12/08 02:17:27
0 2020/12/08 02:17:31
0 2020/12/08 02:17:36
0 2020/12/08 02:17:43
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.