RCU Forums
0 2025/12/18 14:59:29
0 2025/12/23 02:21:35
Airframe side of wing connector
Airframe side of wing connector
0 2025/12/29 02:42:29
Wing side connector
Wing side connector
0 2025/12/29 02:42:32
My wiring diagram so far, wing side
My wiring diagram so far, wing side
0 2025/12/29 02:42:33
Factory wiring set up
Factory wiring set up
0 2025/12/29 02:42:35
Gotta figure out which wire goes where
Gotta figure out which wire goes where
0 2025/12/29 02:42:37
More sleeving
More sleeving
0 2025/12/29 02:42:39
Wires are all fed through sleeving
Wires are all fed through sleeving
0 2025/12/29 02:42:41
More sleeving
More sleeving
0 2025/12/29 02:42:43
More sleeving
More sleeving
0 2025/12/29 02:42:46
Horizontal stabilizer wire connector. Note the locking tab.
Horizontal stabilizer wire connector. Note the locking tab.
0 2025/12/29 02:42:48
JP Controllers, landing, brake gyro, lighting
JP Controllers, landing, brake gyro, lighting
0 2025/12/29 10:41:59
Heat shrink labels applied
Heat shrink labels applied
0 2025/12/29 23:34:30
DYMO Rhino 5200 labeler. Does heatshrink tubing and vinyl labels.
DYMO Rhino 5200 labeler. Does heatshrink tubing and vinyl labels.
0 2025/12/29 23:34:32
Heat shrink label tubing
Heat shrink label tubing
0 2025/12/29 23:34:33
Servos and arms I plan on using
Servos and arms I plan on using
0 2025/12/30 11:48:57
Hardware pack provided with the L-39.
Hardware pack provided with the L-39.
0 2025/12/30 11:48:59
Speed brake mount as supplied
Speed brake mount as supplied
0 2025/12/31 13:22:33
Bracket I made
Bracket I made
0 2025/12/31 13:22:35
Another view of the bracket I made
Another view of the bracket I made
0 2025/12/31 13:22:37
Temp fit
Temp fit
0 2025/12/31 13:22:39
Glued in with Hysol 9462
Glued in with Hysol 9462
0 2025/12/31 13:22:42
Kingtech 160 G5 fits nicely
Kingtech 160 G5 fits nicely
0 2025/12/31 13:22:44
Wiring from removing the floor
Wiring from removing the floor
0 2026/01/05 16:59:36
Nose door servo mount
Nose door servo mount
0 2026/01/05 16:59:38
Nose door servo mount
Nose door servo mount
0 2026/01/05 16:59:41
0 2026/01/05 16:59:43
Whoops some how that servo support got bent
Whoops some how that servo support got bent
0 2026/01/07 15:35:01
Go back and locktite everything. These were not even tite
Go back and locktite everything. These were not even tite
0 2026/01/07 15:35:04
Straightened out
Straightened out
0 2026/01/07 15:35:07
That is a 1.5” servo arm
That is a 1.5” servo arm
0 2026/01/07 15:35:09
Seems who ever drilled and mounted that light got it crooked.. the Factory did this.
Seems who ever drilled and mounted that light got it crooked.. the Factory did this.
0 2026/01/07 15:35:12
0 2026/01/07 15:35:13
There are the main door arms, they are 2”
There are the main door arms, they are 2”
0 2026/01/07 15:35:19
There is speed brake servo set up. 1.5” arm
There is speed brake servo set up. 1.5” arm
0 2026/01/07 15:35:21
Nose gear door uses a 1.5” arm. I actually used a standard plastic arm that came with the servos
Nose gear door uses a 1.5” arm. I actually used a standard plastic arm that came with the servos
0 2026/01/07 15:35:23
Had to create some extra clearance
Had to create some extra clearance
0 2026/01/07 15:35:26
Now I can get more steering
Now I can get more steering
0 2026/01/07 15:35:28
That is the max steering radius after I did the above mod
That is the max steering radius after I did the above mod
0 2026/01/07 15:35:30
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.